BFD provides link failure detection S3328TP-EI featuring light load and high speed. Static BFD for RIP is a mode to implement the BFD function.
Run:
system-view
The system view is displayed.
Run:
bfd
BFD is enabled globally.
Run:
quit
Return to the system view.
NOTE:
To configure one-arm BFD, go to Step 2. To configure two-arm BFD, go to Step 3.
Run:
bfd cfg-name bind peer-ip peer-ip interface interface-type interface-number [ source-ip source-ip ] one-arm-echo
BFD is enabled between the specified interface and peer router.
NOTE:
When configuring the one-arm Echo function on the S3328TP-EI-24S switch, set the source-ip source-ip to the IP address of an interface on the switch. Ensure that the peer device can ping this IP address.
